Home Decor & Improvment
- Office Products
Bedding & Bath
- Kitchen & Dinning
- Event & Gifts
Step 1:Mark The Holes,Measuring the width of the shade，use brackets to determine the placement of your screw.
Step 2:Install Brackets and Shade,The wall bracket with gear will be on the side,and the Idle End Unit Bracket should be on the other side for standard installation.
Won't tighten screws completely yet.Insert the plug into the bracket,with the shade in place ,adjust the brackets so they fit snugly on each end of the shade.
Now go back and tighten the Bracket screws completely.
Step 3:Install the black frame,Display the all shade,Unscrew the screw,remove the end cap,then put the black frame into the tube,install the end cap again.Fixed the frame,to keep frame and shade parallel,frame and shade close to the wall(no angle to the wall)Then Tighten the 2 screws.
Step 4:Adjust the shade,if you need.Roll up the shade by the roller chain,then the shade will be awning.
Please allow 1-3cm error due to manual measurement.
Please understand that colors may exist chromatic aberration